Program Play - Yamaha R CD-S700 Owner's Manual

Audio CD
You can customize the playback order of up to 50 tracks
stored on an Audio CD. This operation is not available for
Data Disc and USB.
1
Press s to stop playback.
2
Press PROGRAM.
• In this mode, the front panel
This unit is set to program input mode.
3
Program a desired track by pressing the
corresponding numeric button and ENTER.
+

PROGRAM PLAY

display shows as normally, even
when this unit is in PURE
DIRECT mode.
Following information is displayed.
When you press "6":
The selected track number
When you press ENTER:
Total number of tracks
currently programmed
Repeat this operation to program more tracks.
You can select the same track again.
Note
Pressing PROGRAM in program input mode exits to normal
playback mode, though programmed tracks are stored.
4
Press h to start program play.
Following information is displayed.
Current track
Total time of the tracks
currently programmed
Elapsed time of the
current track
15
En