Hilti PD-S Manual page 15

Hide thumbs Also See for PD-S:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 13
▶ Check the accuracy of the product if it has been dropped or subjected to other mechanical stresses.
▶ Although the product is designed for the tough conditions of jobsite use, like other measuring instruments
it should be treated with care.
▶ When not in use, products must be stored in a dry, high place or locked away out of reach of children.
▶ The product is not intended for use by children.
▶ Comply with national health and safety requirements.
2.3
Proper arrangement of the workplace
▶ Avoid unusual postures when working on ladders. Maintain firm footing and balance at all times.
▶ Secure the site where you are taking measurements and when using the product do not direct the laser
beam toward other persons or toward yourself.
▶ When the product is brought into a warm environment from very cold conditions, or vice-versa, allow it
to become acclimatized before use.
▶ Use the product only within its specified limits.
▶ Keep the laser aperture clean to avoid measurement errors.
▶ Comply with the national accident prevention regulations.
2.4
Laser classification for Class 2 laser products
The device complies with Laser Class 2 in accordance with IEC 60825-1:2014 /EN 60825-1:2014. These
devices can be used without further protective measures.
CAUTION
Risk of injury! Do not direct the laser beam toward persons.
▶ Never look directly into the source of the laser beam. In the event of direct eye contact, close your eyes
and move your head out of the path of the laser beam.
3
Description
3.1
Product overview
3.2
Intended use
The product described is a laser range meter. It is designed for single measurements and for continuous
measurement of distances.
Distances can be measured relative to all objects with a surface consisting of any normally laser-reflecting
material such as concrete, stone, wood, plastic or paper. The use of prisms or other highly reflective targets
is impermissible and, if attempted, can falsify the results.
The product is approved for use with batteries of type AAA.
3.3
Items supplied
Laser range meter, belt pouch, 2 batteries, quick-start operating instructions, manufacturer's certificate,
safety instructions
2190182
*2190182*
Printed: 29.03.2018 | Doc-Nr: PUB / 5410137 / 000 / 00
1
Display
@
;
Measure / Continuous measurement but-
ton
Area measurement / Units button
=
ON / Delete / OFF button
%
Display
Battery status indicator
&
Last measured value
(
Units
)
Current measured value
+
Measurement reference
§
English
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents