Procedure For Tilting Up - Yamaha F250 LF250 Owner's Manual

connect the fuel line if the outboard mo-
tor is equipped with a fuel joint.
Otherwise fuel may leak.
ECM00990
CAUTION:
Before tilting the outboard motor, follow
G
the procedure under "Stopping engine"
in this chapter. Never tilt the outboard
motor while the engine is running. Se-
vere damage from overheating can re-
sult.
To prevent the cooling water passages
G
from becoming frozen when the ambient
temperature is - 5°C or below, tilt the out-
board motor up after it has been
stopped 30 seconds or more.
EMU28005

Procedure for tilting up

Power trim and tilt models / power tilt models
1. Place the remote control lever / the gear
shift lever in neutral.
N
ZMU03196
N
ZMU04588
2. Disconnect the fuel line from the out-
board motor or close the fuel cock.
3. Press the power trim and tilt switch / pow-
er tilt switch "
motor has tilted up completely.
UP
4. Push the tilt support knob into the clamp
bracket or pull the tilt support lever toward
you to support the engine.
Operation
" (up) until the outboard
ZMU04602
38