Pentatech FG 20 Operating And Safety Instructions Manual page 20

#
Remove the batteries and replace them with new LR 03 alkaline
batteries. Pay attention to the battery polarity markings in the battery
compartment [22].
#
Ensure that the seal [28] is flat along the edge of the rear cover and
attach the transmitter to the rear cover.
Receiver
#
Press the locking tab [8] downwards and remove the battery
compartment cover.
#
Remove the batteries and replace them with new LR 14 alkaline
batteries. Pay attention to the battery polarity markings in the battery
compartment [14].
#
Replace the battery compartment cover on the receiver.
#
Test the function of the device after changing the batteries
Maintenance + cleaning
#
Check the proper condition and function regularly.
#
Use a soft, dry cloth to clean the surfaces of the appliance.
Troubleshooting
Fault
Receiver does not react when
doorbell button is pressed
Chime sound is distorted
Reception range is very small
Receiver reacts without the doorbell
button being pressed
GB - 20
Cause
Coding of transmitter and receiver do not match
Batteries are discharged or incorrectly inserted
No radio link
Batteries in the receiver are running down
Batteries are discharged or running down
Building fabric or metal surfaces are shielding
the radio transmission
Interference with the radio link
A similar device in the vicinity is operating with
the same digital code of this frequency
Declaration of conformity
The company Indexa GmbH hereby declares that the wireless chime FG 20
conforms with the basic requirements and the other relevant regulations of
the EU Council Directive 1999/5/EC. The conformity has been documented.
The complete declaration of conformity can be read at: www.pentatech.de.
Disposal
Do not dispose of packaging material, used batteries or products as
household waste. Please use your recycling system. Details are
available from your local authority.
Warranty
This device is supplied with a warranty of 2 years from the date of purchase.
Please retain your receipt as proof of purchase. This warranty is only valid for
the first purchaser and is not transferable. The warranty furthermore covers
material or manufacturing defects only. It does not apply to worn parts or
damage to fragile parts, e.g. switches or batteries. The product is solely
intended for private use and not for commercial use. In the event of incorrect
and/or improper handling, the use of force or any work on the device that is
not performed by an authorised service centre, the warranty shall expire. This
warranty does not restrict your statutory rights.
Remedy
Ensure the transmitter and receiver coding match
Install new batteries, respecting the polarity
Reduce the distance between transmitter and
receiver
Install new batteries, respecting the polarity
Install new batteries, respecting the polarity
Change the location of the equipment
Change the coding set on the equipment
Switch off other radio transmitters and interfering
devices
Change the location of the equipment
Change the coding set on your equipment