Test Mode 2 (Reference Information) - Pioneer DJM-350 Service Manual

1

6.2 TEST MODE 2 (REFERENCE INFORMATION)

A
This unit is provided with Test mode 2 for use on the production line.
In this mode, operations of keys, switches, operating elements of VRs, and indicators can be confirmed.
Use this mode as required.
Press the POWER key while
holding the CH-1 CUE,
CH-1 FADER START,
B
and JET keys pressed.
Test mode 2
is activated.
C
Version display
Press any key other
than CH-1 CUE,
CH-1 FADER START,
JET, or POWER.
D
All indicators are unlit.
All operating elements
under the management
of the microcomputer
E
can be operated.
All indicators are lit.
Finished
F
32
1
2
Press the POWER key while holding the CH-1 CUE,
CH-1 FADER START, and JET keys pressed.
Test mode 2 is activated.
The CH-1 CUE, CH-1 FADER START, JET, and POWER keys
are excluded from the operation keys that can be used for shifting
to the mode for making all the indicators unlit.
This is to make sure that the version is indicated immediately
after Test mode 2 is entered.
The MIC LEVEL, MIC EQ(HI), MIC EQ(LO),
and TRIM operating elements are excluded.
DJM-350
2
3
3
4
4