Table of Contents
Advertisement
Message
Check Tray2
Connection
Chg. Cleaner
Close Duplex
*1
Uint Cover
Close Front Cover
Close Rear Cover
Close Top Cover
Energy Saver
Load
(paper size)
Low on: xxx
Open and Close
Front Cover
Open DuplexCover
*1
Remove Misfeed
Description
The paper feed unit (option) is
not installed correctly.
The fuser cleaner is dirty.
The duplex unit cover is open.
The front cover is open.
The rear cover is open.
The top cover is open.
In the Energy Saver mode.
There is no paper of the indicat-
ed size in the paper tray being
used.
There is no paper of the correct
size loaded in the paper tray.
The toner indicated by xxx is
low.
The front cover is not closed
correctly.
There is a paper misfed in the
duplex unit.
Error & Status Messages
Comments
Install the paper feed unit
correctly.⇒ the "Setup
Guide" that comes with the
printer
You can print about 1,000
more pages after this mes-
sage is displayed.
Close the duplex unit cover.
Close the front cover. ⇒ the
"Setup Guide" that comes
with the printer
Close the rear cover.
Close the top cover.
Press the operation key or
send a job from the comput-
er to turn the power on.
Load the indicated paper
size into the paper tray be-
ing used. ⇒ P.29 "Loading
Paper"
Load the correct size paper.
Replace the indicated toner
cartridge. The color of the
toner is shown by the
CMYK color model. The
meaning is following.
• C: cyan
• M: magenta
• Y: yellow
• K: black
⇒ P.66 "Replacing the Toner
Cartridge"
Open the front cover and
close it correctly until it is
locked into place.
Remove the misfed paper.
⇒ P.59 "When the Message
"Open DuplexCover Remove
Misfeed" Appears"
4
37
Advertisement
Table of Contents
