Care And Cleaning; Safety Protective Cut-Out - Jocel JFV019158 Instruction Manual

g. Hold the iron over the sink, press and hold the self-clean button and gently shake the iron
and fro.
(Steam and boiling water will come out of the soleplate. Impurities and flakes (if any) will
be flushed out.)
h. Release the self-clean button as soon as all water in the tank has been used up.
Repeat the self-clean process if the iron still contains a lot of impurities.

CARE AND CLEANING

1. Turn the temperature control dial (1) to "OFF", then disconnect the iron from the wall outlet
and let it cool down completely.
2. Deposits and other residues on the sole plate can be removed with a cloth soaked in a
vinegar/water solution.
3. The casing may the wiped with a damp cloth and then polished with a dry one.
4. Never use any abrasives to clean the sole plate.
5. Keep the sole plate smooth; avoid contact with metal objects.
STORAGE
•
Turn the temperature control dial(1) to "OFF" and set the steam control knob (7) to
position"0"(=no steam).
•
Disconnect the iron from the wall outlet.
•
Pour any remaining water out of the water tank.
•
Stand the iron upright and let it cool down completely.
•
The power cord can then be round around the iron.
•
Always store the iron in an upright position.

SAFETY PROTECTIVE CUT-OUT

In the unlikely event of the thermostat failing, the protection cut-out will operate to prevent the
iron overheating.
Then the iron should be taken to the nearest Technical Assistance facility.
- 27 -