Installation - Toshiba MMU-AP0057MH-E Installation Manual

4

Installation

REQUIREMENT
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
• Do not put a heavy article on the indoor unit. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by necessity, use buffering
cloth or other soft cloth to not damage the unit.
• To move the indoor unit, hold the hooking metals (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, or resin parts).
• Carry the package by two or more persons, and do not bundle it with plastic band at positions other than specified.
 External view
13 to 20 Ceiling open dimension 580 to 594
Panel external dimension 620
17-EN
– 9 –
13 to 20
 External view
Ø162
Bottom face of ceiling
235
Unit external dimension 575
53
193
Hanging bolt pitch 496 to 538
Wiring entry
Ceiling open dimension 580 to 594
(for remote control)
Refrigerant pipe connecting port
Electrical control box
(Gas side)
ØA
(93) 40
Refrigerant pipe connecting port
(Liquid side)
Ø6.4
3
Model MMU- A
AP005 to AP012 9.5
AP015 to AP018 12.7
Bottom face of ceiling
105 235
Knockout for simple
OA for Ø100
Wiring entry
257 (for power supply)
Hanging bolt M10 or W3/8
(Procured by locally)
Drain discharge port
(VP20)
154 184
Bottom face of ceiling
Ceiling panel
Indoor unit
Bottom face of ceiling
Unit: mm
191
146
2.5 to 9.5
18-EN