Koala Kare KB100 Instructions

KB100, KB110 and KB200 REPLACEMENT STRAP
INSTRUCTIONS
P/N 885-KIT
KB100 KB110 KB200

Hardware Supplied

Two 5/8" Phillips Pan Head Machine Screws One Truss Head Wood Screw

Tools Required:

Phillips Head Screwdriver or 1/8" Allen Wrench
1. Open Baby Changing Station. Remove the
screws that secure the old strap to the unit.
Discard old strap and screws.
2. Position the new strap on the unit with the
buckle towards the liner dispenser. (See Image).
3. For all models, take one of the Phillips Pan
Head Machine Screws. Insert it through the hole
in the chafe tab and into the hole in the front of
the bed. Secure the screw into the screw insert.
4. Repeat step 3 for the other end of the strap.
For KB200 model use the other Phillips Pan Head
Machine Screw. For KB100 and KB110 models
use the Truss Head Wood Screw.
5. Ensure that the strap is buckled. Clean up
mess and close unit.
®
Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399
www.koalabear.com
P/N 496 January 2011