Silvercrest SEMM 1470 A1 Operating Instructions Manual page 63

3) Then press the positioning lever
towards the recess on the milk tank lid
4) Pull the milk nozzle
the milk tank lid
5) Undo the silver attachment on the milk nozzle
milk nozzle") and pull it downwards and off.
6) Clean the silver attachment and the milk nozzle
from the milk tank lid
with a little washing-up liquid. Rinse all parts afterwards with plenty of clean
water.
7) Afterwards, replace the silver attachment onto the milk nozzle
at the desired height (see section "Setting the milk nozzle").
8) Push the milk nozzle
lid
For thorough cleaning, the connecting plug can be removed from the milk tank
lid :
1) Turn it towards the
2) Clean connecting plug with tap water.
Afterwards, dry it thoroughly.
│ GB │ MT
■ 60
with the positioning lever
.
along with the positioning lever
and the positioning lever
and push the connector assembly all the way back into the appliance.
symbol and pull it out.
and the milk nozzle
so that they disconnect.
downwards and out of
(see section "Setting the
that you have removed
back into the milk tank
SEMM 1470 A1
at the same time
in warm water
and set it