Advertisement
LCD Digital Display Screen
During detecting, the metal targets are divided into three categories by the target identification cursor.
SILVER - Higher conductivity metals, such as silver, aluminum and copper
(Such as coins: .25cents, 50cents and 1 U.S. dollar coin can be illumined at this point)
MID RANGE - Medium conductivity metals,
(Such as pull-tabs, 5 cents nickel coin,1 cent zinc coin and many other European coins can be
illumined at this point. Generally golden rings can be also illumined at this point.)
IRON - Low conductivity metals
(Such as iron and all types of other ferrous metals.)
Depth Sensitivity Indication - 'DEPTH-SENS'
Press the "SENSTIVITY" '+' and '-' keys to adjust the metal detector's sensitivity adjustment. The depth
gauge only shows the relative depth of the metal objects, rather than the precise depth.
*Generally, treasure hunters set it to the highest level, if there is much electromagnetic interference around
or the soil is highly mineralized, the detector will sound an erratic tone, and if this happens, then you should
reduce the detector's sensitivity.
Press the PINPOINT button on the handle, and the PINPOINT cursor will appear on the digital display.
The metal detector will now be in the Non-Motion mode, you should be able to locate and pinpoint the
metal target beneath the search coil.
*The metal detector also features a low battery indication cursor, this displays and warns you of low battery.
Three kinds of Audible Tones
The detector will sound three frequencies of sounds "low, medium, high" tones. The sensitivity ruler mark is
displayed in three different segments, which indicates the current state / activity sensitivity level of the metal
detector. (Can can use your own metals and adjust the discrimination levels accordingly to hear the different
audible frequency tones created by different metal types). The metal type and / or target indication cursor on
the metal detector LCD display screen will be illuminated accordingly.
Target Categories
Iron nail
Pull-tabs and 5 cents nickel coin Medium tone
25 cents
(4) Level Discrimination Modes
When powering on the unit, it is automatically set to the ALL METAL mode. Press the "MODE" button, to
have the ability to eliminate the metals that you don't want, keep pressing the button to adjust the modes.
Indication Tone
TARGET ID Indication
Low tone
IRON is illumined & flickers for 5 seconds
MID RANGE is illumined & flickers for 5 seconds
High tone
SILVER COPPER is illumined & flickers for 5 seconds
www.PyleAudio.com
Advertisement
