Connecting the Projector
Adjusting the Projected Image
14
NOTE:
The projector is equipped with a "foot adjustor" for
adjusting the projector height.
To raise the projector
1. Lift the projector up and press the foot adjustor release button.
The foot adjustor pops out.
2. Press the foot adjustor release button and hold it in while
raising the projector to the display angle you want, then release
the button to lock the foot in position.
Foot Adjuster
To lower the projector
1. Hold the projector with one hand, then press and hold down the
foot adjustor release button.
2. Lower the projector, then release the foot adjustor release
button to lock the foot in position.
NOTE:
When placing the projector in its carrying case, please
first retract the foot adjustor to avoid breakage.
Foot Adjuster
Release Button
Xerox DP1015 User's Guide