Advertisement
4. SETUP LEVEL
Choose [LOW]/ [MIDDLE] / [HIGH].
5.SERAIL Com
Set camera ID to use at the time of communication.
Effective range （0～255）. Push （ ）Key and set ID
6.COLOR ADJ.
Choose 8 level
R Y-GAIN+/ RY-GAIN-/ BY-GAIN+/
(
BY-GAIN-/RY-HUR+/RY-HUR-/BY-HUR+/BY-HUR-) for adjustment.
Effective range （0～255）.。
7.INITIALIZE
Change to set for initialization as pege 2
Push ENTER KEY then automatically saved and out of menu screen.
Remarks) you cannot go back to the set you saved once pressing 'ENTER' key. Please re-set
in case it happens.
It set the saved condition before it is out of setting screen.
Select from [SAVE / NOSAVE / RELOAD]. More in detail is as below.
■
SAVE:
on.
■
NOSAVE:
■
RELOAD:
electricity
PACIFIC CORPORATION UK
www.pacific-cameras.co.uk
― Setting initialization
EXIT ― Save the setting
Save the function you set. You can use the same after turning electricity
Not to save the function you set. Therefore it returns to the function you
previously save.
Return to the function you previously save without a need to turn
on.
Adjust Select key.
Advertisement
