Advertisement
4.
PRIVACY
―
It sets an area which you don't record. 4 masks are available to use.
When you use mask, switch-over [ON/OFF] on item; DISPLAY. Set the masking position by
[TOP/BOTTOM/LEFT/ RIGHT].
[BLACK/GRAY1~4/WHITE/RED/GREEN/BLUE/YELLOW/CYAN/MAGENTA]
5.
SHARPNESS
Make a sharp image by emphasizing the edge.
Select a sharp image not only by [ON/OFF] also by an extent value from 20 level at [ON] mode.
Blinking function
6. BLINK_POS
―
B linking function
At surveillance with recorder, there is such a case which cannot be judged if the camera is
working even if an image doesn't find any movement on screen or if the recorder is broken.
This function is easy to avoid such problems to put a blinking mark on each position.
U_LEFT
U_RIGHT
D_LEFT
D_RIGHT
Remarks) Item; MOTION DETECT (Go to Page 11) is prior to Item; BLINK_POS.
PACIFIC CORPORATION UK
www.pacific-cameras.co.uk
―
P rivacy masking
Upper left （initial value）
Upper right
Down left
Down right
Advertisement
