Advertisement
You can set those items below on this OTHERS page.
■
DNR
■
MOTION
DETECT
■
GAMMA
■
SETUP LEVEL
■
SERIAL Com ID
■
COLOR ADJ.
■
INITIAL
1. DNR*
S elect level of DNR. Select [LOW/MIDDLE/HIGH/AUTO/OFF] by key.
I t adjusts DNR level automatically when you set as AUTO by AGC [ O N/OFF ] .
※
※
2.MOTION
DETECT
Motion detect function
Motion Detect
It shows a box-shaped mark in yellow on the upper left of screen when it detects people, car etc on
screen. 4 areas are available to set. In addition, you can set a detection area with mixing these 4
areas.
To see each area, switch-over [ON/OFF] by DISPLAY. Change those area position by
TOP/BOTTOM/LEFT/ RIGHT by key.
It positions upper and left side of the monitor (coordination:0,0,0,0） as images shown.
3.
GAMMA
Use the setting [0.35-0.70] on normal operation.
In case that there is no necessary for Gamma correction such as image processing, use the
setting [1.0]
PACIFIC CORPORATION UK
www.pacific-cameras.co.uk
<<<OTHERS>>>
― Motion Detect function
Others
Advertisement
