Cleaning The Machine - Xerox WorkCentre 5638 Quick Use Manual

Maintenance
number.
CAUTION: When replacing consumables, DO NOT remove the covers or guards that
are fastened with screws. You cannot maintain or service any of the parts that are
behind these covers and guards. Do NOT attempt any maintenance procedure that is
NOT specifically described in the documentation supplied with your machine.

Cleaning the Machine

WARNING: When cleaning the machine do NOT use organic or strong chemical
solvents or aerosol cleaners. Do NOT pour fluids directly onto any area. Use supplies
and cleaning materials only as directed in this documentation. Keep all cleaning
materials out of the reach of children.
WARNING: Do not use pressurised air-spray cleaning aids on or in this equipment.
Some pressurised air-spray containers contain explosive mixtures and are not
suitable for use in electrical applications. Use of such cleaners can result in a risk of
explosion and fire.
1
Document Glass and Constant
Velocity Transport Glass
Apply Xerox Cleaning Fluid or Xerox
Anti-Static Cleaner, to a lint-free cloth.
Liquid should never be poured directly
onto the glass.
Wipe clean the entire glass area.
Wipe away any residue with a clean
cloth or paper towel.
NOTE: Spots or marks on the glass will be reproduced on the prints when
copying from the document glass. Spots on the Constant Velocity Transport
Glass will show up as streaks on the prints when copying from the document
handler.
2 Touch Screen
Use a soft, lint-free cloth, lightly
dampened with water.
Wipe clean the entire area, including
the Touch Screen.
Remove any residue with a clean cloth
or paper towel.
For more information about maintaining other areas of your machine please refer to the
Interactive User Guide CD (CD2), contained in the CD Pack delivered with your machine.
Page 30
Constant velocity
transport glass
Quick Use Guide