Appendix D: Applying For A License - Huawei USG6000 Upgrade Manual

HUAWEI USG6000&USG9500
Upgrade Guide
Due to the limitation of third-party TFTP server software, TFTP upload of files larger than 16
MB may fail. Therefore, you are advised to use FTP to upload the files larger than 16 MB.
Run the tftp ip-address put source-filename [ destination-filename ] command in the user
view to upload files to the TFTP server. The following operation assumes that the IP address
of the TFTP server as 192.168.0.2.
<FW> tftp 192.168.0.2 put test.bin
After the uploading is complete, check whether the sizes of files on the TFTP server are the
same as those in the CF card. If no, re-upload the files to ensure that they are completely
uploaded to the TFTP server.
Step 4 Download files from the TFTP server to CF card of the USG6000.Run the tftpip-
addressgetsource-filename [ destination-filename ] command in the user view to download
files from the TFTP server.
<FW> tftp 192.168.0.2 get temp.bin
After the downloading is complete, check whether the sizes of files in the CF card are the
same as those on the TFTP server. If no, re-download the files to ensure that they are
completely downloaded to the CF card.
----End

1.8 Appendix D: Applying for a License

Context
The license file to be loaded on the device is a .dat file. This file is not delivered with the
device and is independently generated by the license center of Huawei.
Procedure
Step 1 Obtain a license authorization code (Entitlement ID).
Find the license authorization certificate in the delivery accessories and obtain the Entitlement
ID, as shown in Figure 1.
Issue 01 (2018-01-16)
NOTICE
NOTE
The license authorization certificate is delivered together with the product to the customer in A4 papers
or CD-ROMs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 USG6000
101