Introduction; Warning & Safety Measures - Ravas 5200 User Manual

1. Introduction

This manual describes the use of the RAVAS-5200. Read this manual carefully. The installer
must be informed of the contents of this manual. Always do things in the correct order. This
manual should be kept on a safe and dry place. In case of damage or loss the user may
request a new copy of the manual from RAVAS.
2. Warning & Safety measures
When using the RAVAS-5200, please observe carefully the
instructions and guidelines contained in this manual.
Always perform each step in sequence. If any of the
instructions are not clear, please contact RAVAS.
• All safety regulations that apply to the pallet truck remain valid and unchanged;
• No weighing operations are allowed if any persons or objects are in the vicinity; around,
under or close to the load;
• Any modifications done to the system must be approved in writing by the supplier, prior to
any work being completed;
• It is the sole responsibility of the purchaser to train their own employees in the proper use
and maintenance of this equipment;
• Do not operate this unit unless you have been fully trained in its capabilities;
• Check the accuracy of the scale on a regular basis to prevent faulty readings;
• Only trained and authorized personnel are allowed to service the scale;
• Always follow the operating and maintenance instructions of the pallet truck and ask the
supplier when in doubt;
• RAVAS is not responsible for errors that occur due to incorrect weightings or inaccurate
scales.
Should you have any further questions after reading this manual then you can contact us at:
RAVAS Europe B.V.
Toepadweg 7
Postbus 2023
5300 CA Zaltbommel
Nederland
min -10°C
15°F
0
IP65
Phone: +31 (0)418-515220
Fax: +31 (0)418-515320
Internet: www.ravas.com
Email: info@ravas.com
Changes reserved
USER MANUAL – RAVAS-5200
!
READ
CAREFULLY
max 40°C
105°F
0
4