Step 2 3 Point Hook Up - Mahindra BBLST5 Owner's Manual

STEP 2
3 POINT HOOK UP
IMPORTANT:
A 3 point category 1 hitch is required.
The lower arms of the 3 point hitch must be stabilized
to prevent side to side movement. Most tractors have
sway blocks or adjustable chains for this purpose.
Slowly back up the tractor to the implement and use
the tractor's 3 point hydraulic control.
WARNING
TO PREVENT INJURIES:
Park the vehicle on a flat surface in a well ventilated
area.
Disengage the P.T. O.
Apply parking brake.
Stop the engine and remove the ignition key.
Wait until all moving parts have stopped before
leaving the driver's seat.
Attach tractor's lower arms (item 1) on the pins (item
2) and secure with lynch pins (item 3)
Connect top center link (item 4) to the upper hitch
using a pin and hairpin (item 5) as shown in figure.
Return to the tractor and operate the tractor's 3-point
hydraulic control up until the blade comes off the
ground.
Lift the parking stand.
Return to the tractor and slowly operate the tractor's 3
-point hydraulic control up and down to check for
clearance between tires, frame drawbar, etc.
Move or remove the draw bar if it interferes with the
implement.
ASSEMBLY
TO PREVENT INJURIES:
Hooking up equipment to the tractor is dangerous
and can result in serious injury or death. Do not
allow anyone to stand between the tractor and the
implement while backing up to the equipment. Do
not operate hydraulic 3-point lift controls while
someone is directly behind tractor or near the
implement.
TO PREVENT INJURIES:
Always check all hardware for tightness before using
or working around the blade. The moldboard will fall
off if blade pivot nut is missing.
7
DANGER
DANGER