brel-motors DC-458 Manual

Read the manual before you begin the installation. If these instructions are not followed,
this may lead to defects and injury in which warranty can't be claimed.
____________________________________________________

Technical specifications


Battery type:

Frequency:

Emission power:

Emission distance:
____________________________________________________

Button specifications

Operates with these BREL motors and transmitters:
Motors: MR, MEV, MCE, MDE, MLE, MJE, MTE, MEQ, MPE.
DC-50, DC-90, DC-92, DC-94, DC-101, DC-109, DC-114, DC-227, DC-252,
Transmitters:
DC-253, DC-292, DC-305, DC-306, DC-313, DC-2700, DC-2702.
____________________________________________________

Teaching multiple transmitters

To delete one channel , you must repeat the above operation.
BREL motors is part of:
Manual Brel emitter with clock
Type DC-458 and DC-920
Type DC-458 and DC-920
3V CR2430
433,92MHz
10 MW
200 meter open field
2 walls 35 meter.
2xP2
Press 2x the P2
Button. (a)
Note:
The time difference between
automatically controlling up
and down, must be atleast 32
minutes, otherwise there will
be ERROR on the display.
1xP2
Press 1x the P2 The programming of the
button. (b) new transmitter is ready.
Page 1