Important Safety Instructions - Kesla proG 20 Manual

GRAPPLES – USER MANUAL 5

2. IMPORTANT SAFETY INSTRUCTIONS

DE-PRESSURIZING GRAPPLE:
After stopping the engine there may remain some pressure in
hydraulic components of the grapple. This pressure may cause
spraying of high-pressure oil. RISK OF SERIOUS INJURY!
BEFORE ANY MAINTENANCE DE-PRESSURIZE THE
GRAPPLE
These safety instructions do not cover all possible operating
conditions, but are helpful in avoiding dangerous situations and
accidents.
In addition to the given instructions, follow the legal safety
instructions and occupational safety regulations. Observe also the
instructions given in the user manuals of the base machine . The
dealer and owner of the machine have to make sure to comply
with all the local rules and regulations.
Familiarise yourself with the functions, controls and operating
instructions of the grapple before using the machine.
Follow all the precautions and instructions related to grapple use.
This way you may avoid accidents when working with the grapple.
Do not operate, service or repair the grapple under the influence
of alcohol or drugs.
Using the grapple is allowed only when all the safety equipment
and protections are appropriately in place and in good condition.
When operating, servicing or repairing the grapple, wear personal
safety equipment such as safety boots and helmet, ear protection
and safety goggles. Use well-fitting clothes with no long hanging
parts. Loose clothes can cause a danger of entanglement.
Note the danger of slipping when working near the grapple.
Check that no bystander is within 25 m of the grapple when you
start the engine and start operating. When necessary, place
warning signs around the logging site.
Pay attention to phone and power lines. Be extremely careful
when working close to high voltage power lines. Check safety
distances from the local electrical safety regulations. When
necessary, contact the telephone and power company.