Kesla proG 20 Manual page 22

7. The warranty does not cover parts which normally wear out and need to be regularly
replaced such as filters, oil, hoses, gaskets, belts, skid bearings and glide pads or any
similar.
8. The warranty does not cover faults resulting from:
-
Non-compliance with proper use and/or safety issues as mentioned in the product
manual
-
Improper or non-sufficient installment or service
-
Normal wear and tear
-
Accidents
-
Overloading
-
Impurities in oil or in hydraulic system
9. The customer bears financial responsibility for costs arising from fulfilling warranty
requirements such as travel and accommodation costs for repair personnel, fees for
transporting equipment or components, overtime or other similar costs.
10. If machinery breaks down, Kesla Oyj bears no responsibility for damages caused by
machinery to property or persons. Furthermore, Kesla Oyj bears no responsibility for
financial loss occurring in down time (for example, losses arising from wages or
transportation fees).
11. Attachments or components supplied to Kesla Oyj by sub-contractors are quaranteed only
according to the warranty terms given by the supplier.
12. The warranty will be considered either patially or entirely invalidated if repair or
maintenance carried out by the owner/user are done improperly, if unsuitable, non-
compatible or foreign parts are installed, if modifications or changes to the product or
hydraulic equipment are made without the a written permission of Kesla Oyj or if hydraulic
system is adjusted exceeding allowed tolerances or reference values.
13. In addition to the above mentioned terms there may be more detailed product-specific
warranty terms which are written into the user manual of each product.
GRAPPLES – USER MANUAL 20