Mitsubishi MELSEC-A Series User Manual page 4

The following product manuals are available. Please use this table as a reference to
request the appropriate manual as necessary.
Detailed Manual
Type MELSECNET/10 Network System
(PLC to PLC network) Reference Manual
Type MELSECNET/10 Network System
(Remote I/O network) Reference Manual
Before use of this module, be sure to read the Type MELSECNET/10 Network
System (PLC to PLC network) Reference Manual or the Type MELSECNET/10
Network System (Remote I/O network) Reference Manual.
Compliance with the EMC Directive and the Low Voltage Directive
When incorporating the Mitsubishi programmable controller into other industrial
machinery or equipment and keeping compliance with the EMC and low voltage
directives, refer to Chapter 3 "EMC Directive and Low Voltage Instruction" of the User's
Manual (Hardware) for the CPU module used or the programmable controller CPU
supplied with the base unit.
The CE logo is printed on the rating plate of the programmable controller, indicating
compliance with the EMC and low voltage directives.
For making this product compliant with the EMC and low voltage directives, please refer
to Section 3.1.3 "Cable" in Chapter 3 of the above-mentioned user's manual.
About the Manuals
Manual name
Manual No.
(Model code)
IB-66440
(13JE33)
SH-3509
(13JE72)