BodyCAP e-Celsius Performance Quick Start Manual page 9

3. SET UP
Follow the subsequent procedure before swallowing the pill:
- To switch on the monitor, complete a long pressure on the button
- Connect the monitor to a power supply source if needed.
- Connect the monitor to a PC using the USB cable provided and run the
ePerformance Manager software.
Select Configuration item :
Set up the monitor :
Monitor tab:
Configure the communication channel
and synchronization settings.
- Shutdown the software and unplug the monitor.
- Connect the activator to a power supply.
- On the Monitor, Select the Menu ''Pill'' and select ''Pill Activation''.
- The monitor will guide you, step by step until the association of the pill to the
monitor. It is recommanded to rotate the pill into the hole of the activator after
pushing the activator button.
- Note the ID of the pill, and the monitor channel displayed on the monitor screen
(May be useful for Backup mode).
- The pill is now associated with the monitor and can be swallowed after
positionning the bracelet.
P060GUI002 Quick Start système e-Celsius Performance.6 - EN
Subjet tab:
Fill in the identification fields of the
monitor according to the desired criterion.
9
.