Breville Smooth Wave BMO840 Instruction Book page 19

1. After selecting the desired quantity with the
POWER / AMOUNT dial, press START to
begin cooking.
2. Cooking process ends.
3. At the end of the cooking process, if you
think the food requires additional cooking
time, you can select the 'A BIT MORE™'
setting. Close the microwave door and press
the A BIT MORE™ button to add A BIT
MORE™ cooking time. The timer will start
to count down.
A Bit
More
NOTE
As soon as A BIT MORE™ button is pressed
the microwave will start cooking.
If A BIT MORE™ is pressed and there is no
previous SMART COOK, SMART REHEAT,
SMART DEFROST or SHORTCUTS setting
the microwave will default to the basic mode
and add 20 seconds at 100% power.
BMO840_ANZ_IB_C20.indd 19
SOUND
This program allows you to choose between
the new or the traditional sound suite when
using the microwave oven.
By default, the microwave oven will play the
new Breville designated sound profile. If you
wish to change, follow the below instructions:
Open door and press SOUND button on
shortcuts panel.
Turn the TIME/FOOD TYPE or POWER/
AMOUNT dials to switch between the sound
selection. Press START to confirm your
selection or press STOP/CLEAR button to
cancel your selection.
To go back to the Breville designated sound
profile, simply press once again on the
SOUND button.
MUTE
This program allows you to mute the sound of
the microwave oven during operation.
When the MUTE program is selected, no tone
will sound.
Open door and press MUTE button on
shortcuts panel and press start dial to confirm.
To return to the previous volume setting, press
the MUTE button a second time OR press
the BEEP VOL button on shortcuts panel and
press start dial to confirm.
KEEP WARM
Keep Warm allows you to stop food going
cold while completing other tasks. This
program operates at a low power level for a set
period of 20 minutes to keep food at the ideal
temperature.
To use the Keep Warm setting, open the
door and the press KEEP WARM button on
shortcuts panel.
19
23/4/20 11:43 am