Xerox 980 Hints And Tips Manual page 16

Continuous feed printing system
Hide thumbs Also See for 980:
Table of Contents

Advertisement

Hints and Tips
Path from Main Menu
Printer Manager/
Consumables/Black
Waste Toner Container
Printer Manager/
Consumables/Black
Waste Toner Container
Printer Manager/
Consumables/Black
Waste Toner Container
Printer Manager/
Consumables/Black
Waste Toner Container
Printer Manager/
Consumables/Black
Waste Toner Container
Printer Manager/
Consumables/Black
Developer
Printer Manager/
Consumables/Smoke
Filter Replacement
1-12
Xerox 490/980 Color Continuous Feed Printing System
Present
Required Change
2.Open the printer rear
2.Open the printer rear
cover (b) corresponding
door corresponding to
to the illuminating
the illuminating indicator
waste toner container
lamp.
replacement indicator.
*If you replace the
Step 3: re-write bullet as
container during
follows:
printing, install the new
the container during
container within 3
print operation, install
minutes after releasing
the new container
the level.
within 3 minutes.
4. Hold and pull the
4. Hold and pull the
knob (d) frontward until
drawer handle (d)
it stops.
forward until the drawer
stops.
up
upward
6. Hold and push the
6.Holding the drawer
knob (d) in until it stops.
handle (d) slide the toner
container into the
machine.
Step 2:
cover
door developer
indicated
*Start the operation of
re-write bullets as follows:
the replacement
*Before starting this
procedure after a new
procedure, ensure a new
Smoke Filter is opened
Smoke Filter is opened
before the Smoke Filter
and ready to install.
is replaced while
*The new Smoke Filter
printing, and it prepares
must be installed and
it in places exchanged
the lock lever reset
easily.
within 30 seconds after
*Replace the Smoke
removing the old smoke
Filter after release the
filter.
lock lever of smoke
door, and complete the
operating procedure
(label display 2-8) until
the lock lever of smoke
door is set within 30
seconds.
Comments
Same change for
all Waste Toner
Container colors.
Same change for
*When replacing
all Waste Toner
Container colors.
Same change for
all Waste Toner
Container colors.
Same change for
all Waste Toner
Container colors
Same change for
all Waste Toner
Container colors.
Same change for
all Developer
colors.
Hints and Tips User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Color 490Color 980

Table of Contents