Dell EMC NX4 Series Manual page 20

Replacing a standby power supply
Hide thumbs

Advertisement

Enabling CallHome or ConnectHome and Email notifications
ConnectHome Configuration:
Encryption Enabled = yes
Dial In:
Enabled = yes
Modem phone number =
Site ID =
Serial number = HK192201084
Email:
Priority = 1
Sender Address = connectemc@emc.com
Recipient Address(es) = szg30@hosts.pvt.dns
Subject = CallHome Alert
Primary:
Email Server = sun1.hosts.pvt.dns
Secondary:
Email Server =
FTP:
Priority = Disabled
Primary:
FTP Server =
FTP Port = 21
FTP User Name = onalert
FTP Password = **********
FTP Remote Folder = incoming
FTP Transfer Mode = active
Secondary:
FTP Server =
FTP Port = 21
FTP User Name = onalert
FTP Password = **********
FTP Remote Folder = incoming
FTP Transfer Mode = active
Modem:
Priority = Disabled
Primary:
Phone Number = 918005270941
BT Tymnet = no
Secondary:
Phone Number = 918006262452
BT Tymnet = no
3. Verify that ConnectHome works with the
/nas/sbin/nas_connecthome -test connec
command for each enabled connection.
tion_name
For example:
/nas/sbin/nas_connecthome -t -email_1
Sample output:
-----------------------------------------------------
ConnectEMC 2.0.27-bl18 Wed Aug 22 10:24:32 EDT 2007
RSC API Version: 2.0.27-bl18
Copyright (C) EMC Corporation 2003-2008, all rights
reserved.
-----------------------------------------------------
Reading configuration file: ConnectEMC.ini.
Run Service begin...
Test succeeded for primary email.
20
Replacing a Standby Power Supply

Advertisement

loading

  Related Manuals for Dell EMC NX4 Series

This manual is also suitable for:

Emc ax4-5f8

Table of Contents