Installing And Locking The Sps Front Bezel - Dell EMC NX4 Series Manual

Installing and locking the SPS front bezel

Installing and locking the SPS front bezel
1. While holding the front SPS bezel by its edges, attach it to the latch brackets on the front
of the enclosure
2. Push the bezel in until you feel it latch into place, and pull back on the bezel slightly to
ensure it is secured.
3. Lock the bezel by inserting and then turning the key clockwise
Figure 9. Installing and locking the SPS bezel
14 Replacing a Standby Power Supply
(Figure 9 on page 14).
(Figure 9 on page 14).