Table of Contents
Advertisement
5. Troubleshooting
4.
Select the check boxes in [Air Discharge] to discharge air bubbles for each color.
• If the print-head configuration is set to "Common head"
• If the print-head configuration is set to "Double White"
5.
Click [Discharge] in the "Air Discharge" area.
Wait until "Connect the tubes of the air bubble ejection tool to the port, and click OK button." is
displayed.
6.
Connect the tubes of the air-bubble ejection tool to the air-bubble discharge port.
Push the tube connector straight into the port until you hear a click.
90
Advertisement
Table of Contents
