SHERCO 250 SE-R Workshop Manual page 30

CHECKING ENGINE COMPONENTS
WARNING
A used fork must have its original pinion and its
rollers
Attach the forks in the grooves of the sliding
•
gears and push the barrel into its ball bearing.
Oil the fork shafts and thread them into the
•
forks. Push the forks into their housing in the
housing until they stop
WARNING
When the forks are attached in the barrel, it is
important to be careful that the rollers do not
fall off the studs
WARNING
The gearbox shafts must now turn without any
hard points.
.
1
1
26