Advertisement
How to...
Replace Wooden Standing Platform
Steps 1 to 3
NYLOCK NUTS AND WASHERS
Steps 4 to 6
NYLOCK NUTS AND WASHERS
Removal
Professional Rehab, V2 Max,
Rack & Roll and Client Reformers
1. Remove eight (8) nylock nuts (four
per side) positioned underneath the
wooden standing platform behind
the aluminum rails.
2. Remove eight (8) washers (four
per side) off of the bracket
holding bolts.
3. Slide the support bracket off
the eight (8) bolts.
Replacement
4. Position replacement bracket with
wooden standing platform onto
the eight (8) bolts.
5. Reattach all eight (8) washers and
nylock nuts.
6. Ensure that all nuts are tightened.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Merrithew SPX Reformers
Summary of Contents for Merrithew SPX Reformers
- Page 1 How to… Replace Wooden Standing Platform Removal Steps 1 to 3 Professional Rehab, V2 Max, Rack & Roll and Client Reformers 1. Remove eight (8) nylock nuts (four per side) positioned underneath the wooden standing platform behind the aluminum rails. NYLOCK NUTS AND WASHERS 2.
- Page 2 SPX Reformers Step 1 1. Remove the seven (7) screws from underneath the platform attach it to the front support end of the Reformer. 2. Position the new wooden standing platform onto the front support end aligning the seven (7)
Need help?
Do you have a question about the SPX Reformers and is the answer not in the manual?
Questions and answers