Panasonic CF-SZ6 Series Operating Instruction page 34

First-time Operation
2
A
3
34
NOTE
●
Note that the computer consumes electricity even when
the computer power is off. For the period of time the fully
charged battery will fully discharge, refer to è
Instructions - Reference Manual "Battery duration".
●
When the DC plug is not connected to the computer, disconnect
the AC cord from your AC wall outlet. Power is consumed sim-
ply by having the AC adaptor plugged into an electrical outlet.
2 Open the display
Hold the side of the computer with either of your hands and
then hold and lift the (A) part to open the display.
CAUTION
●
Do not open the display wider than necessary (160° or
more), and do not apply excessive pressure to the LCD. Do
not open or close the display holding the edge of the LCD
segment.
3 Connect your computer to a power outlet
The battery charging starts automatically.
CAUTION
●
Do not disconnect the AC adaptor and do not switch the
wireless switch to on until the first-time operation procedure
is completed.
●
When using the computer for the first time, do not connect
any peripheral device (including wired LAN cable) except
the battery pack and AC adaptor.
●
When an AC adaptor other than the one specified is
connected, an error notification will appear on the screen.
Always use the specified AC adaptor.
●
Handling the AC adaptor
Problems such as sudden voltage drops may arise during
periods of thunder and lightning. Since this could adversely
affect your computer, an uninterruptible power source (UPS)
is highly recommended unless running from the battery
pack alone.
●
When the DC plug is not connected to the computer,
disconnect the AC cord from your AC wall outlet. Power is
consumed simply by having the AC adaptor plugged into an
electrical outlet.
●
Do not apply hot air released from the ventilation hole
(exhaust) to the cable.
4 Turn on the computer.
Open the display, and slide and hold the power switch
(è page 31) until the power indicator (è page 31) lights.
Operating