Cleaning The Air Filters - Toyotomi NTN-928R32 User Manual

CLEAN AND MAINTENANCE
CLEANING THE INDOOR UNIT
1. Turn off the unit and cut off the power supply. Wait after that at least 5
minutes before you start cleaning of the unit otherwise there might be the
risk of electric shock.
2. Clean the indoor unit (only the outside plastic parts) with dry or damp soft
cloth in cold water. Do not spray or spill the unit in order to clean it.
3. Clean air fi lters regularly, in order to avoid accumulation of dust that might
affect the good performance of the air conditioner. After removing the air
fi lters, do not touch the metallic parts. It might cause injury.
4. Do not use water which temperature that exceeds 40
panel. Otherwise it may cause deformation or discoloration.
5. Do not use liquids, hard detergents, thinner, gasoline or any other chemical
product for cleaning. Otherwise plastic parts of the air conditioner might be
damaged or even cause electric shock.

CLEANING THE AIR FILTERS

§
Remove pre-fi lters and healthy fi lters
– Use both hands to open the front panel for an angle from both ends of
the panel in accordance with the direction of the arrow, until it clamps in a
certain position. Lift gently the pre-fi lters until they unclench, release them
from the slot and remove them.
– Clean pre-fi lters with a vacuum cleaner or wash them in cold water and let
them dry well in shady area before you reinstall them. Clean healthy fi lters
with a vacuum cleaner or shake them outdoors. CAUTION! Do not clean
healthy fi lters with water or other kind of liquid otherwise their performance
will be damaged.
– Reinstall the dried fi lter in reverse order of removal, then close the front
panel back to its original position.
60
o
C to clean the front
GB