Manual Override - Girard Systems GG750 Service And Repair Manual

B. MANUAL OVERRIDE
1. In case of motor issues, the GG750 has a manual override to close the awning.
2. Remove the endcap opposite the motor, by removing the 3 Philips head screws.
3. Using a 13mm wrench, turn the manual override shaft in order to close the
awning, see Figure 10. NOTE: The manual override is one-way, it can only close
the awning.
4. Figure 10 is showing a right hand motor version of the GG750 . If you have a left
hand version, the manual override will be on the opposite side.
(Figure 10)
Page 32 of 49