Download Print this page

Qudo QDSLTMC12B Instruction Manual page 4

Wireless earbuds with charging case

Advertisement

2. Unit will be ready to be used once all four power
indicator lights on the back of the charging case are
solid blue. (Approximately 2.5 hours).
Recharging earbuds/charging case
1.
Place the earbuds inside of the charging case. The
indicators on earbuds will light up in red when charging
process is initiated.
2.
Red indicator light on the earbuds will be "on" during the
charging process and will turn blue then turn off once
both earbuds are fully charged. (Approximately 1 hour).
Charging time may vary based on the battery level of
the charging case.
3.
To check battery level of charging case: Press "check
battery button" inside the charging case to review
battery status indicators on the back of the charging
case.
4.
Recharge the charging case by connecting the USB
charging cable (included) to the charging port on the
back of the charging case and the other end to a USB
power source. (Approximately 2.5 hours).
Functions
Function
Enter
pairing
mode
Turn on the
earbuds
Turn off the
earbuds
Play/pause
music
Change
song
Answer
call
Hang up
call
Operation Method
Press and hold multi-function button until
indicator light flashes blue and red or you
hear the voice prompt "pairing".
Press and hold multi-function button until
indicator light flashes blue.
Press and hold multi-function button until
indicator light flashes red. You may also hear a
"disconnected" voice prompt.
When playing music, press the multi-
function button on either side of earbud to
pause the music, and press it again to play.
When playing music, press multi-function
button twice on either earbud to skip to the
next music track.
Press multi-function button once to answer
incoming call.
Press multi-function button once to hang up
the call.
·3·

Advertisement

loading