Related Manuals for Qudo QDSLTMC12B
Summary of Contents for Qudo QDSLTMC12B
- Page 1 WIRELESS EARBUDS WITH CHARGING CASE QDSLTMC12B INSTRUCTION MANUAL IMPORTANT: Please read all instructions carefully before use and keep for future reference...
-
Page 2: Product Overview
& blue simultaneously to enter pairing mode. Turn on Bluetooth function on mobile device. Then select “QDSLTMC12B” from the device available list to pair. Once pairing is successful, indicator will flash in blue on the side of earbud. Bluetooth status on mobile screen will also display “Connected”... -
Page 3: Charging Operation
(Continue to use with previously connected Bluetooth device) Turn on Bluetooth function on mobile device. Select “QDSLTMC12B” from the device available list to pair. Take out either side earbud. Press and hold multi-function button of earbud until indicator flashes blue. Then repeat the step on the other side earbud. - Page 4 2. Unit will be ready to be used once all four power indicator lights on the back of the charging case are solid blue. (Approximately 2.5 hours). Recharging earbuds/charging case Place the earbuds inside of the charging case. The indicators on earbuds will light up in red when charging process is initiated.
-
Page 5: Troubleshooting
Bluetooth ● Battery level is low function or remove “QDSLTMC12B” in earbuds from the list of device. ● Put both earbuds into the charging case to recharge (check the battery level in the... -
Page 6: Production Specification
Production specification Model: QDSLTMC12B ● ● Bluetooth controller: CSR64110 V4.2 version ● Support A2DP decoding ● Operating distance: Up to 10 metres (distance may vary due to external electronic interference and obstacle) ● Working frequency: 2.402GHz ~ 2.480GHz Transmit power: CLASS 2, MAX 4dbm ●...