Advertisement
Product Overview
Charging case opening switch
Indicator light
microphone
Multi-function button
Pairing the earbuds
(Initial setup and connection with Bluetooth device)
NOTE: Initially each earbud must be connected to the mobile
device individually
1.
Take out one of the earbuds from the charging case, press
and hold the multi-function button until indicator flashes red
& blue simultaneously to enter pairing mode.
2.
Turn on Bluetooth function on mobile device. Then select
"QDSLTMC12B" from the device available list to pair.
3.
Once pairing is successful, indicator will flash in blue on the
side of earbud. Bluetooth status on mobile screen will also
display "Connected" under the name "QDSLTMC12B".
4.
Take out the other earbud from the charging case, press
and hold the multi-function button on this earbud until
indicator flashes in blue & red to enter pairing mode. Select
"QDSLTMC12B" in the Bluetooth pairing menu to connect
this earbud to device. The indicator will flash in blue with a
beep tone once the pairing is completed.
5.
Now both earbuds are ready to be used as a stereo pair of
earbuds. Note: Music volume is controlled by mobile device.
6.
To turn off the earbuds, press and hold the multi-function
button on either earbud until indicator light flashes in red
with "disconnected" voice prompt. Both earbuds will turn off
together. Alternately, put both earbuds back into the
charging case.
Check battery button
Left ear
·1·
Four power
indicator lights
Multi-function button
Right ear
Micro
USB
port
Indicator light
Advertisement
