Advertisement
(Continue to use with previously connected Bluetooth device)
1.
Turn on Bluetooth function on mobile device. Select
"QDSLTMC12B" from the device available list to pair.
2.
Take out either side earbud. Press and hold multi-function
button of earbud until indicator flashes blue. Then repeat
the step on the other side earbud. Bluetooth status on
mobile screen will display "Connected" under the name
"QDSLTMC12B" once pairing process is successful.
3.
Now both earbuds are ready to be used. Music volume will
be controlled by the mobile device.
(Using individual earbuds)
1.
Take out either side earbud from the charging case.
Press and hold the multi-function button until indicator
flashes blue.
2.
Turn on your mobile devices Bluetooth function and
search for the name "QDSLTMC12B" and connect it.
Bluetooth status on mobile screen will also display
"Connected" under the name "QDSLTMC12B".
Using the left earbud for handsfree phone calls
1.
The left earbud can be used to answer an incoming
phone call as handsfree when it is connected to a
mobile phone. (NOTE: Only left side earbud will work
for phone calls).
2.
An incoming call beep tone will go off when a phone
call comes in. Short press multi-function button to
answer the incoming call through the left side earbud
and press it again to end the call.
Music playing function
1.
While music is playing, press multi-function button once
to pause music, and press it once again to start playing
again.
2.
Press multi-function button twice to skip to the next
music track during music playback.
3.
Adjust the volume of music through volume control keys
on the phone.
Charging operation
Initial use of the earbuds
1. With the earbuds placed inside the charging case,
connect the charging cable (included) to the charging
port on the back of the charging case and the other end
of the charging cable to a workable USB power source.
·2·
Advertisement
