Connecting The Power Cables - Dell PowerEdge C6320 Getting Started Manual

Connecting the power cable(s)
Connect the system's power cable(s) to the system, and if a monitor is used,
connect the monitor's power cable to the monitor. Plug the other end of the power
cables into a grounded electrical outlet or a separate power source such as an
uninterrupted power supply or a power distribution unit.
NOTE: The system supports both AC and HVDC power inputs and up to
two 1400 W power supply units (200-240 VAC nominal input voltage) or up to
two 1600 W power supply units (200-240 VAC nominal input voltage).
1400 W power supply unit is supported only for China.
10 │ Installation and configuration