SCM CUBO2 SMART Oem Manual page 42

OEM Manual – CUBO
SCM reserves possibility to modify or to change at present, without prevent notice.

Documentation produced by SCM, is intended as guide for installation.

The installer is responsible for verify, certifications, design, installation unit and all present systems.

SCM Frigo is not responsible for any malfunction in the system due by the unit and/or system design and/or

installation problems.
SCM Frigo will not be responsible for operation unit or any system present, if above specific are not respected.

SMART
2
www.scmfrigo.com
Linked
Pag. 42