Transportation
WARNING: Be careful during transportation.
The product is heavy and can cause injury if
it falls.
•
BE 20: Before transportation, disconnect the power
cord from the power supply.
•
BE 30: During transportation, keep the fuel valve
closed and keep the engine in a vertical position to
prevent fuel leakage.
To lift the product
WARNING: Make sure that the lifting
equipment has the correct specification to lift
the product safely. The rating plate on the
product shows the product weight.
WARNING: Do not lift a damaged product.
Make sure that the lifting eyes are correctly
installed and not damaged.
WARNING: Do not walk or stay below or
near a lifted product.
•
Lift the product manually at the handles (A).
A
Voltage, V
Phases
Frequency, Hz
16
Transportation, storage and disposal
A
Technical data
•
If you use lifting equipment, attach the lifting
equipment to the lifting eyes.
Storage
•
Clean the product before storage.
•
Keep the product in a dry and frost-free area.
•
Keep the product in a locked area to prevent access
for children or persons that are not approved.
•
Remove all fuel from the fuel tank before you put the
product in storage for a long period of time. Discard
the fuel at an applicable disposal location. (BE 30)
•
When the fuel tank is drained, start the engine. Let
the engine operate until there is no fuel remaining in
the carburetor and the engine stops. (BE 30)
Disposal
•
Obey the local recycling requirements and applicable
regulations.
•
Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
•
When the product is no longer in use, send it to a
Husqvarna dealer or discard it at a recycling
location.
BE 20
380, 400, 440
3
50
WARNING: Do not use metal hooks,
chains or other lifting equipment with
rough edges that can cause damage to
the lifting eye.
BE 30
N/A
N/A
N/A
1299 - 001 - 14.04.2020