Husqvarna CF 11M Operator's Manual page 5

Noise safety
WARNING: Read the warning instructions
that follow before you use the product.
• High noise levels and long-term exposure to noise
can cause noise-induced hearing loss.
• To keep the noise level to a minimum, do
maintenance on and operate the product as given in
the operator's manual.
• Examine the muffler for damages and defects. Make
sure that the muffler is correctly attached to the
product.
• Use approved hearing protection while you operate
the product.
• Listen for warning signals and voices when you use
hearing protection. Remove the hearing protection
when the product is stopped, unless hearing
protection is necessary for the noise level in the work
area.
Electrical safety
WARNING: Read the warning instructions
that follow before you use the product.
• The power plug must agree with the power outlet. Do
not do modifications to the plug. Do not use adapter
plugs with grounded products. Power plugs without
modifications, and correct power outlets decrease
the risk of electrical shock.
• Do not pull the power cord to move the product.
• Pull the power plug to disconnect the power cord. Do
not pull the power cord.
• Make sure that the power cord does not catch in
doors, fences or equivalent obstacles that can cause
damage to the power cord.
• Do a check that the power cord and the power plug
are in good condition and not damaged.
• Do not connect a damaged power cord to the
product.
• Do not touch the power cord if it becomes damaged
during operation of the product. Disconnect the
power cord from the power outlet.
• Keep the power cord away from water, oil, sharp
edges and moving parts.
• Keep the product away from rain and wet conditions.
The risk of electrical shock increases if water goes
into the product.
• Use a power supply with RCD (residual-current
device) protection if you operate the product in a
moist environment. An RCD decreases the risk of
electrical shock.
1381 - 002 - 12.03.2020
Personal protective equipment
WARNING: Read the warning instructions
that follow before you use the product.
• Always use approved personal protective equipment
when you operate the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the correct
personal protective equipment.
• Regularly do a check of the condition of the personal
protective equipment.
• Use an approved protective helmet.
• Use approved hearing protection.
• Use approved respiratory protection.
• Use approved eye protection with side protection.
• Use protective gloves.
• Use boots with steel toe-cap and non-slip sole.
• Use approved work clothing or equivalent close-
fitting clothing that has long sleeves and long legs.
Fire extinguisher
• Keep a fire extinguisher near during operation.
• Use a powder fire extinguisher of "ABE" class or a
carbon dioxide fire extinguisher of "BE" type.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
• Do not use a product with defective safety devices.
• Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
Motor protection circuit breakers (MPCB) (CF 67TCI4P)
The motor protection circuit breakers give protection
against electrical faults.
CAUTION: If a motor protection circuit
breaker releases, do not try to set the switch
back to ON immediately. To prevent motor
damage, it is necessary to let the motor
become cool. The MPCB switch cannot be
set to ON before the motor is cool. If you try
to set the switch to ON by force, the motor
and the switch can become damaged.
Safety instructions for maintenance
WARNING: Read the warning instructions
that follow before you use the product.
5