Maintaining The System; To Replace The Remote Control Battery - Bose SoundDock SOUNDDOCKTM DIGITAL MUSIC SYSTEM Owner's Manual

Maintaining the system

Reference
Changing the remote control battery is the only regular maintenance that is required. You may also clean
the system as needed.

To replace the remote control battery

Replace the remote control battery when it stops operating (normally every year or two), or its range seems
reduced. Use only a Duracell, Eveready, Energizer, Maxell, Toshiba, or Shun Wo CR2032 or DL2032 3-volt
lithium battery.
Keep in mind that lighting and other room conditions, in addition to battery age, can affect the operating
range of an infrared remote control.
Figure 5
Inserting a new
battery
To clean the system
Wipe the system using a soft dry cloth. You can also lightly vacuum the grille.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to drop into any openings.
To remove an insert from the dock
1. With your thumbs on the front of the dock near the Bose
until the rear of the insert lifts up (Figure 6).
2. Lift out the insert and replace it with the one you need.
Figure 6
Removing an
insert
+
® logo, and your index fingers inside it, pinch
Reference
9