Siemens VS08G Series Instruction Manual page 11

! Please note
The mains socket must be protected
by at least a 16 amp fuse.
If a fuse should blow when you
switch on the appliance, this may be
because other electrical appliances
which have a high current draw are
connected to the same power circuit.
To prevent the fuse from blowing,
select the lowest power setting
before switching the appliance on,
and increase the power only once it
is running.
Fold out picture pages.
Setting up
Figure
1
a) Insert the flexible hose adapter into
the air intake opening and allow it to
engage.
b) To remove the flexible hose, press the
two lugs together and pull the tube
out.
Figure
2*
a) Align and connect the handle and the
telescopic tube.
b) Push the handle straight into the tele-
scopic tube until it engages.
To release the connection, squeeze
the collar sleeve and pull the handle
out.
Figure
3*
a) Connect the floor nozzle and the tele
scopic tube together.
b)Push the telescopic tube straight into
the connecting piece of the floor tool
until it engages.
To release the connection, squeeze
the locking collar and pull the tele-
scopic tube out.
Figure
4*
To adjust the length of the telescopic
tube, press the adjusting
button/adjusting sleeve in the direc-
tion of the arrow and adjust the tube
to the required length.
en
5