Toyota CAMRY HYBRID 2019 Quick Reference Manual page 37

A I I
Preceding
vehicle mark
LONG MIDDLE
(default setting)
This mode employs a radar sensor to detect the presence of a preceding vehicle
u to a ro imate y
following distance and operates to maintain a preset following distance from the
vehicle ahead. These distances vary based on vehicle speed.
Note: Vehicle-to-vehicle distance will close in when traveling on long downhill
slopes.
(1)
Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-to-
vehicle distance can also be set by operating the vehicle-to-vehicle distance
control.
Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears
hen a vehic e is detected running ahead of you, the system automatica y
decelerates your vehicle. When a greater reduction in vehicle speed is
necessary, the system a
time . he system wi res ond to changes in the s eed of the vehic e ahead
in order to maintain the vehicle-to-vehicle distance set by the driver. A warning
tone warns you when the system cannot decelerate sufficiently to prevent your
vehicle from closing in on the vehicle ahead.
A
SHORT
ft m ahead, determines the current vehic e to vehic e
(2)
ies the ra es the ra e ights wi come on at this
To change the vehicle-to-
vehicle distance
Push the "
to cycle through the
settings, which will change
progressively.
(3)
35
" button