General - Vacon OPTC3 User Manual

general

1. GENERAL
Vacon NX frequency converters can be connected to the Profibus DP using a fieldbus board. The con-
verter can then be controlled, monitored and programmed from the Host system.
The Profibus fieldbus board shall be installed in slot E on the control board of the frequency con-
verter.
Internal components and circuit boards are at high potential when the frequency
converter is connected to the power source. This voltage is extremely dangerous
and may cause death or severe injury if you come into contact with it.
WARNING!
24-hour support +358 (0)40 8371 150 • Email: vacon@vacon.com
vacon • 3
1