NARGESA MT500 A Instruction Book page 29

Spiral Tooling Diam. 450mm
1
Tooling for Spiral Start Diam. 100mm
4
Tooling to make Spiral Start Diam. 180mm
2
Tooling to make the Spiral Start Diam. 80mm
5
Tooling to twist square bar 12 and 35mm or 1/4" and 1 1/2" Inches Whitwort
20
INSTRUCTIONS BOOK OF FORGING TWISTING MACHINE MT500 A
Tooling made of steel F1140 to make the second
operation of the spiral in flat bar, square or round
max. 25mmthickness.
Tooling made of treated steel F1140 to make the
start of the spiral in flat bar, square or round, 16mm
maximum thickness.
Tooling made of treated steel F1140 to make the
start of the spiral in flat bar, square or round max.
10mm thickness.
Tooling made of treated steel F1140 to make the
start of the spiral in flat bar, square or round max.
10mm thickness.
Tooling made of treated steel F1140 to make twis-
ting in 12x12mm and 35x35mm square bar or
1/4x1/4" and 1 1/2"x1 1/2" Inches Whitwort, in
conventional carbon steel.
28