Page 1
Inlet guide for edge square bar Ref. 140-11-01-00027 NOA60 TECHNICAL FEATURES PRADA NARGESA, S.L Ctra. de Garrigàs a Sant Miquel s/n 17476 Palau de Santa Eulàlia (GIRONA) SPAIN Tel. 972 568085 - nargesa@nargesa.com www.nargesa.com...
INDEX 1. Description of tooling ………………………………………………….………. 3 2. Identification of elements …….………………………………….…………….. 4 3. Setting up the tooling……….……..…………………………..………………. 4 4. Performance….…………………………………………………………...……. 5 5. Warnings…...…………………………………………………………………… 5 6. List of parts……………………………………………………………………….. 6 GUIA DE ENTRADA PARA MACIZO CUADRADO AL CANTO...
1. Description of tooling Inlet guide for edge square bar ► Inlet guide to emboss edge square bar up to 20mm or 3/4” inch Ref: 140-11-01-00027 Weight: 18 Kg To emboss edge square bar, one set of embossing rollers 140-11-01-00026 is required ►...
3. Setting up the tooling In order to fix the tooling to the embossing machine NOA60, it is required to adjust it by fastening the bolts at the inlet guide of the machine as indicated in the pictures below: 1.
4. Performance In order to start working with the inlet guide to emboss solid square bar on the edge, it is required to adjust the upper rollers to the material. Turning clockwise around the upper Wheel of the tooling, these upper rollers will move upwards.