Advertisement
CONNECTIONS
1
1 Card Input. If you have the DAC module
installed, the USB input will be here. If you don't
have a module installed, it will be covered.
2 Balanced Input. Connect a balanced source
here with XLR cables.
3 SE Input. Connect a standard source here with
RCA cables.
4 SE Passive Preamp Output. Connect to powered
monitors or a speaker amp with RCA cables.
Remember, this is passive, it doesn't have gain or
convert types of inputs.
2
3
4
5
5 Balanced Passive Preamp Output. Connect to
powered monitors or a speaker amp with XLR
cables. Remember, this is passive, it doesn't have
gain or convert types of inputs.
6 On-Off Switch. Up is on. Down is off. Pretty
simple, right?
7 AC Input. Plug the power cord in here. Plug the
other end into an outlet of the correct voltage.
Trying to run a 115V product on 230V will blow
the fuse and generally make for a bad, bad day.
012345678
115VAC 30W
6
7
Advertisement
