Advertisement
GETTING STARTED
1. If you chose Jotunheim R as an amplifier only
(no DAC), simply:
a. Plug it in with the supplied power cord
b. Connect an input or inputs to the XLR and RCA
inputs on back.
c. Turn on the amp, select the correct input, wait
25-35 seconds for the relay protection to engage
the output, and enjoy.
2. If you chose Jotunheim R with the internal
True Multibit DAC card, you'll also need to con-
nect your source to the DAC module.
a. Use a high-quality, USB 2.0-rated cable of 2M
or less in length.
b. If you are using a version of Windows prior
to Windows 10, you may have to install drivers,
which are available at schiit.com/drivers.
ABOUT UPGRADES
Additional cards for Jotunheim R may be
released in the future. When this happens, you
can return the Jotunheim to us to have the card
installed, or have it installed by a qualified elec-
tronic tech. If you'd like to be the first to know
about upgrades as they become available, sign
up on the SPAM link on our site.
Advertisement
